-40%

Workman KW2000A - 6 Pin, DC Power Cord Plug - Alinco, Kenwood, Icom, Yaesu Radio

$ 3.14

Availability: 100 in stock
  • Type: Connector
  • MPN: KW2000A
  • Compatible Brand: Universal
  • Model: KW2000A
  • Country/Region of Manufacture: China
  • Refund will be given as: Money back or replacement (buyer's choice)
  • Item must be returned within: 30 Days
  • Compatible Model: Kenwood/Yaesu/Alinco
  • Brand: Workman
  • To Fit: Ham Radio Transceiver
  • Return shipping will be paid by: Buyer
  • Condition: New
  • All returns accepted: Returns Accepted
  • Restocking Fee: 20%

    Description

    Workman KW-2000A
    Replacement 12 Volt DC Power Cord Plug for
    Alinco, Kenwood, Icom, Yaesu and RCI HF Radios
    The Workman KW2000A is a direct replacement 12 Volt power cord plug for Alinco, Kenwood, Icom and Yaesu Transceivers.  It is the old "standard" plug for many transceivers and if the picture matches your plug, it will work with your radio.
    Comes complete with outer black plastic boot and 4 pins. Note, 4 pins is what most radios use.  Two on the right (facing from the rear) are for POSITIVE and two in the middle are for NEGATIVE.  The remaining pins are not commonly used.
    Known to work with:
    Kenwood: TS50, 120, 130, 140, 180, 430, 440, 450, 570, 870
    Yaesu: FT840, 857, 897, 890, 920, 847
    Icom: IC751, 740, 745, 735, 706, 706mkII, 706mkIIG, 707, 718, 720, 730, 737, 738, 746, 756
    Alinco DX77, DX70T/TH
    Any rig with this 6 pin molex style plug.
    Please look closely at the connector detail in the Picture 1.  If the pin layout is the same, this is the correct plug for your radio.
    The blackened highlighted version is shown only to help with visualization. It is not not the matching female plug and IS NOT included.
    Picture 2 shows an example of the jack this plug will work with.  If this is the type of jack you have on your radio, and the pin layout is the same as shown, this is the plug for you!
    And, no... unfortunately we do not currently carry the matching replacement jack (as shown in picture 2).
    You will receive the following parts:
    1 Nylon Body (as shown on the left)
    4 Crimp / Solder Pins
    1 Black Outer Sleeve
    We also sell the Workman KW2000, Jetstream JTPC1 and the newer 4-Pin JTPC2 replacement power cords.  Each include heavy gauge wire, fuse holders and fuses. Please check our other listings or email for info.
    BRAND NEW PRODUCT!
    See our other eBay listings for hard-to-find Plasti Dip Products, RF Connectors and Adapters, Coaxial Cable and a full-line of Amateur Radio Accessories too!
    ********************************
    All Customers:
    Please note, we sell on eBay only to reach a larger audience.  Our prices may be higher on eBay than through our regular k1cra.com on-line store.  If you feel our price is too high here, please email us prior to ordering.  We want you to pay the least possible price and we can't do that when we have to share our profit with someone else!
    International Customers:
    1. We ship internationally as a courtesy for our friends overseas.  Shipping charges, Import Taxes, Customs Duties or Other Fees are not included in the purchase price and are your responsibility.  If applicable, these charges may be collected by the shipping provider at time of delivery.
    2. International FIRST CLASS Mail when available, provides no tracking is NOT recommended. It is offered as an alternative to help keep your cost down.  Please allow at least 30 days for international first class mail to deliver before contacting us for assistance.  In fairness, please do not hold us responsible for excessive delivery times caused by the post office.  Once we ship, we lose all control.
    3. If shipping does not quote, postal restrictions prevent us from shipping this item to your country.  Sorry!
    Service Pledge:
    We strive for 100% Positive Feedback!  If not completely satisfied with your purchase, please contact us BEFORE leaving feedback. We promise to discuss and mutually resolve all problems or mistakes immediately.  Negative Feedback should never be necessary.