Professional Switching Power Supply 1000W 24.5/29.9V 40A

Description

ES Radiotel by Lorenzo Anzalone
ES Costruzioni Elettroniche
Professional Switching Power Supply 1000W 24.5/29.9V 40A
FEATURES
- AC input range selected by switch
- ON/OFF switch
- 2mt flexible cable with shuko
- Assembled with high-quality components
- Very low noise
- Equipped with high-efficiency filters and EMC circuit
- Protections: Short circuit / Overload current and voltage / Over temp.
- High reliability/ Low ripple and low noise
- Built-in remote sense function
- Built-in remote ON-OFF control
- Built-in parallel operation function
- Adjustable output voltage by external control 1-5V  from (20~100%)
- Adjustable output voltage by internal trimmer
(24.5 -29.9 Vdc)
- Forced air cooling by built-in DC fan
IMPORTANT
In order to reduce RFI (Radio Frequency Interference) and for safety reasons, we strongly suggest to connect the device to ground earth.
Model
E-SCN-1000
DC Output Voltage
25V
Intput Voltage Error
1%
Rated Output Current
40A
Output Current Range
0-40A
Ripple and Noise
240mVp-p
Voltage Adjustment Range
5.0% typical adjustment by potentiometer
20~100% adjustment by 1~5VDC external control
Inlet Stability
0.5%
Tolerance Voltage
1%
DC Output Power
1000W
Efficiency
84,00%
AC Input Voltage range
90 ~ 130VAC / 180 ~ 260VAC selected by switch, 260 ~ 370VDC
Input Current
Fuse 10A/230VAC - Fuse 15A/115VAC
AC Inrush Current
Cold-Start Current: 60A / 230VAC
Leakage Current
3.5mA/240VAC
Overload Protection
110~135% rated output power,Current limiting, delay shut down o/p voltage, re-power on to recover
Over Voltage Protection
110 ~ 135% follow to output set up point, shut down o/p voltage, re-power on to recover
High Temperature
>100℃ / measure by heat sink, near transformer,Shut down o/p voltage, re-power on to recover
Temperature Coefficient
0.04% /℃ (0~50℃)
Start, Rise, Hold Time
800ms, 50ms, 16ms at full load
Vibration
10 ~ 200Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
Withstand Voltage
I/P-O/P, I/P-FG:1500VAC
Isolation Resistance
I/P-O/P, I/P-FG, 100M Ohms / 500VDC / 25 ℃/ 70% RH
Working Temperature, Humidity
-10℃~+60℃ (Refer to Output Derating Cutve), 20%~90%RH
Storage Temperature, Humidity
20℃~+85℃, 10%~95%RH
MTBF
120Khrs min. MIL-HDBK-217F (25℃ )
Dimension
291x132x68 mm
Weight
2.65 kgs
Special functions
DC voltage adj., Remote sensing, remote control, parallel operation (refer to terminal instruction manual)
Safety Standards
CE
EMC Standards
Meet FCC Part 15J Conduction class A
Shipping
Payment
Returns
Contact-us
About Us
We ship with tracked air freight. Delivery is estimated in 38/72 working hours. As soon we ship we will sent all the shipping information to follow the parcel.
We accept payments with PayPal or bankwire. With PayPal you can pay with your Payapl's account balance or using your own credit card without subscribing to PayPal. For more information don't esitate to contact us by the eBay's seller contact page.
NO CASH ON DELIVERY payments accepted
We follow eBay's guidelines for the return according to the kind of products and services we supply .
Use "contact seller" to ask a question or get in touch with us
Thanks to 40 years of professional service in radio communications we can provide a full service to our custumers, from the inventory products to the customizations request.. We are official resellers for RM Italy, CTE International (Midland e Albrecht), K2 antenne CB e Bieffe cavi, top dealer Marcucci S.P.A. (Icom, Lafayette, Comet, Hoxin, Polmar, Maldol, ecc...) e rivenditori autorizzati Yaesu, Diamond, Nissei, Kenwood, Motorola, Zetagi, MetroVna, Macom, Intek, Sigma, Daiwa, ecc....
Go to our listings
Newsletter
© ES-Radiotel
Prestalia
e-commerce solutions.