AQUATEC high flow water system pressure booster pump transformer 8852-2J03-B424

Description

Aquatec Pressure Boost pump
CDP 8800 110V 60HZ
series (High flow)
3/8" and 1/4" fittings
Including:
pump + transformer 110-120V/60Hz  + both 3/8" and 1/4" fittings
Aquatec model # 8852-2J03-B424
Filter Direct part # HF-8852-110V   (pump + transformer+ fittings)
Condition:  brand NEW
Made in USA
This water booster pump is to boost the input water pressure.  It is usually used to increase the input water pressure for Reverse Osmosis systems. (boost pressure to 60 to 80 psi)
This pump is suitable for RO systems that is 100GPD to 200GPD
* This listing is for the pump+ transformer 110-120V/60hz USA plug + 3/8" and 1/4" fittings.   We have another listing that has 220V/50Hz European plug  pump +transformer.  International customers that need 220V please buy on the 220V listing.   We also have another listing that has pump, transformer, solenoid valve and pressure switch, or just the pump without transformer.
Benefits of using Booster pump for Reverse osmosis systems
·
For RO systems, an increase in input pressure means an increase in
water production
and
water purity
·
RO systems will run more efficient, and have less drain water. Since it uses pressure switch and solenoid valve to turn on/off the water input, it can turn-on and turn-off more accurately than the mechanical auto-shut-off valve.
·
If you use large water container or open water tank, you can use float switch or level switch to control the operation of the pump as well.
·
The transformer included in the package is
plugged into regular 110-120V/60HZ electrical outlet in USA
For more detail specifications, please visit the manufacturer's website Aquatec.com There are detailed manuals for all pump models.
Specifications:
Booster Pump:
Boost pressure
If input water pressure is about 30 to 50 psi, the pump will boost pressure to about 60to 80 psi for RO systems
Water open flow
2.6 liter per minute or 0.69 gallons per minute
Electrical:
24VAC,  0.70Amp to 1.65amp
Connection
Inlet and outlet,  3/8" quick connect fitting, also includes two reducer 3/8 to 1/4" fittings
Motor
Permanent Magnet,  24VAC, enclosed
PUMP
Diaphragm pump, 3 chamber, self-priming 7 feet prime.  It is able to run dry
Material:  Housing
Nylon
Valves
EPDM
Diaphragm
Santoprene
Fasteners
Stainless Steel
Dimension
diameter = 3.5" , length = 7.5"
weight
7.5 lbs.
Transformer
input 110-120VAC 60hz  output: 24VAC 1Amp, Class 2, UL listed
For more detail specifications, please visit the manufacturer's website Aquatec.com There are detailed manuals for all pump models.